接触器触头系统振动机理分析及算法优化

为了解决合闸过程中动、静触头接触引起的振动弹跳问题.本文建立了接触系统的二自由度运动微分方程,并利用遗传算法对交流接触器吸合过程进行优化,同时通过高速摄影实验对接触弹跳的全过程进行了观察和分析.结果表明:理论与实验结果高度一致,铁心在触头分离前发生碰撞,进一步加剧触头弹跳;铁芯弹跳再次碰撞时,触头的弹跳不受影响;在接触器运行过程中,动铁芯的运动会引起系统轻微振动;采用遗传算法优化的接触器触头弹跳时间和最大振幅均减小.研究结果为进一步控制和减小接触弹跳提供了理论依据.     

立井过砂岩富含水层工作面预注浆分析

郑煤集团杨河煤业43采区樊寨副立井施工中需要穿过预计涌水量187 m³/h、厚57 m的砂岩含水层。针对第1回次采用普通水泥工作面预注浆、吸浆量少、升压快、效果差、达不到预期目的等不利情况，在后3回次采用大压力，白银水泥、超细水泥等新材料、单孔上下端正反同时注浆新工艺，采用压注清水、水玻璃，利用水玻璃的黏性，反复冲洗钻孔把细小裂隙中锈蚀颗粒带出，打开注浆通道，同时针对竖向裂隙多、横向裂隙不联系，加密钻孔布置，缩小注浆段高，取得了较好的注浆效果。     

The use of recycled low-density polyethylene films from protective prepreg for the development of nanocomposites with bentonite clay

Prepreg is a pre-impregnated composite fiber where a thermoset polymer matrix material is present. Before being used, these materials are kept at low temperatures and have a low-density polyethylene (LDPE) film for your protection. The increase in the use of structural composites based on prepregs causes an increase in the amount of protective LDPE film. This material is usually discarded or incinerated and can cause great damage to the environment. Thus, the present work aimed to study the feasibility of recycling up to 100% of protective LDPE (rLDPE) to develop blends-based nanocomposites with rLDPE/virgin LDPE (60/40, 70/30, 80/20, 90/10 and 100/0) with the addition of 5 wt% of compatibilizer agent (maleic anhydride grafted LDPE, LDPE-g-MA), and 1 wt% of bentonite (BNT) using a co-rotational twin-screw extruder, followed by hot pressing in a hydropneumatic press and die-cutting. Water absorption test, thermal aging resistance, morphological characterization by scanning electron microscopy, mechanical properties by Izod impact strength and tensile tests, and differential scanning calorimetry were performed. By the results, it was possible to verify the viability of 100% of the recycling of rLDPE. The results showed a good distribution of 1 wt% of BNT in the matrix, better mechanical properties when compared with virgin LDPE. Furthermore, the thermal properties, water absorption test, and thermal aging resistance showed no statistical differences between the samples. These results confirm the effectiveness and the environmental gain in the use of the recycled material.     

Neural network-based hybrid models developed for free radical polymerization of styrene

In the present work, the free radical polymerization of styrene is modeled by considering the phenomenology of the process (a simplified model, which does not include the diffusional effects, gel, and glass effects) in combination with an empirical model represented by an artificial neural network. Differential evolution (DE) algorithm, belonging to the class of evolutionary algorithms, is applied for developing the neural models in optimal forms. For improving the results—predicted conversion and molecular weights as function of time, temperature, and initiator concentration—different combinations between phenomenological model and neural network are tested; also, individual and stacked neural networks have been developed for the polymerization process. This methodology based on hybrid models, including neural networks aggregated in stacks, provides accurate results.     

Dynamic Oscillation via Negative Differential Resistance in Type III Junction Organic/Two-Dimensional and Oxide/Two-Dimensional Transition Metal Dichalcogenide Diodes

Among many of 2D semiconductor-based devices, type III PN junction diodes are given special attentions due to their unique function, negative differential resistance (NDR). However, it has been found uneasy to achieve well-matched type III PN junctions from 2D–2D van der Waals heterojunctions. Here, the authors present other alternatives of type III heterojunctions, using 2D p-MoTe₂/organic n-type dipyrazino[2,3-f:2′,3′-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile (HAT-CN) and 2D p-WSe₂/n-MoO_x systems. Those junction diodes appear to well-demonstrate static and dynamic NDR behavior via resonant tunneling and electron–hole recombination. Extended to an inverter circuit, p-MoTe₂/n-HAT-CN diode enables multilevel inverter characteristics as monolithically integrated with p-MoTe₂ channel field effect transistor. The same NDR diode shows dynamic LC oscillation behavior under a constant DC voltage, connected to an external inductor. From p-WSe₂/n-MoO_x oxide diode, similar NDR behavior to those of p-MoTe₂/n-HAT-CN is again observed along with LC oscillations. The authors attribute these visible oscillation results to high peak-to-valley current ratios of their organic or oxide/2D heterojunction diodes.     

基于小波变换的分数阶微分算法在肝脏肿瘤CT图像纹理增强中的应用

图像纹理增强过程中容易丢失平滑区域纹理细节，而分数阶微分增强虽然能够非线性保留平滑区域纹理细节，但对频率分辨率敏感。针对这个问题，提出一种基于小波变换的分数阶微分纹理增强算法，应用于平扫计算机断层扫描（CT）图像的肝脏肿瘤区域的纹理增强。首先，通过小波变换将图像感兴趣区分解成多个子带分量；其次，基于分数阶微分定义构造一个带补偿参数的分数阶微分掩膜；最后，使用该掩膜与每个高频子带分量进行卷积并利用小波逆变换重组图像感兴趣区。实验结果表明，该方法在使用较大分数阶次显著增强肿瘤区域的高频轮廓信息的同时，有效地保留了低频平滑的纹理细节：增强后的肝细胞癌区域与原区域相比，信息熵平均增加36.56%，平均梯度平均增加321.56%，平均绝对差值平均为9.287；增强后的肝血管瘤区域与原区域相比，信息熵平均增加48.77%，平均梯度平均增加511.26%，平均绝对差值平均为14.097。     

Phase portraits of Abel quadratic differential systems of second kind with symmetries

We provide normal forms and the global phase portraits on the Poincaré disk of the Abel quadratic differential equations of the second kind having a symmetry with respect to an axis or to the origin. Moreover, we also provide the bifurcation diagrams for these global phase portraits.     

A novel differential evolution mapping technique for generic combinatorial optimization problems

Differential evolution is primarily designed and used to solve continuous optimization problems. Therefore, it has not been widely considered as applicable for real-world problems that are characterized by permutation-based combinatorial domains. Many algorithms for solving discrete problems using differential evolution have been proposed, some of which have achieved promising results. However, to enhance their performance, they require improvements in many aspects, such as their convergence speeds, computational times and capabilities to solve large discrete problems. In this paper, we present a new mapping method that may be used with differential evolution to solve combinatorial optimization problems. This paper focuses specifically on the mapping component and its effect on the performance of differential evolution. Our method maps continuous variables to discrete ones, while at the same time, it directs the discrete solutions produced towards optimality, by using the best solution in each generation as a guide. To judge its performance, its solutions for instances of well-known discrete problems, namely: 0/1 knapsack, traveling salesman and traveling thief problems, are compared with those obtained by 8 other state-of-the-art mapping techniques. To do this, all mapping techniques are used with the same differential evolution settings. The results demonstrated that our technique significantly outperforms the other mapping methods in terms of the average error from the best-known solution for the traveling salesman problems, and achieves promising results for both the 0/1 knapsack and the traveling thief problems.     

A Reliable Stochastic Numerical Analysis for Typhoid Fever Incorporating With Protection Against Infection

In this paper, a reliable stochastic numerical analysis for typhoid fever incorporating with protection against infection has been considered. We have compared the solutions of stochastic and deterministic typhoid fever model. It has been shown that the stochastic typhoid fever model is more realistic as compared to the deterministic typhoid fever model. The effect of threshold number T* hold in stochastic typhoid fever model. The proposed framework of the stochastic non-standard finite difference scheme (SNSFD) preserves all dynamical properties like positivity, bounded-ness and dynamical consistency defined by Mickens, R. E. The stochastic numerical simulation of the model showed that increase in protection leads to low disease prevalence in a population.